行波管放大器相位噪声的分析及其抑制

主要分析规则调相信号对行波管放大器频谱纯度的影响,并且根据行波管放大器相位噪声产生的过程和原因,提出两种抑制相位噪声的方法.     

单层开采的圆形定压边界两层油藏压力动态分析

为更好地分析具有越流的多层油藏的压力动态，采用有效井径的概念，在半透壁模型的基础上建立了圆形定压边界、两层越流油藏单层开采时的渗流数学模型。通过拉氏变换得到了拉氏空间中以Bessel函数表示的精确解。数值反演计算结果表明，单层开采的两层油藏与全部打开的两层油藏的压力动态基本相同，都表现为3个阶段：早期是介于两个渗透层之间的均质流动；中间为过渡段，导数曲线出现下凹特征；晚期表现为整个油藏的均质特征。随着边界距离的增加，压力导数值趋近于0．5。半透率越大过渡段出现得越早。导数曲线下凹程度越小；储容比越大导数曲线峰值越小，导数曲线下凹程度越小；随着两层渗透率比值变小。过渡段变短，导数曲线下凹程度变小。图1参9     

空调器中多翼离心风机的噪声研究及结构优化

采用逐步回归法对大量的多翼离心风机实验数据进行拟合,针对家用空调行业中以噪声为其最重要 的考核标准,得出了噪声与叶轮结构参数及风机性能参数间的近似关系式,并以噪声为目标函数进行了优化计算。     

320×240 Pixels CMOS Digital Image Sensor with Wide Dynamic Range

A 320×240 CMOS image sensor is demonstrated,which is implemented by a standard 0.6 μm 2P2M CMOS process.For reducing the chip area,each 2×2-pixel block shares a sample/hold circuit,analog-to-digital converter and 1-b memory.The 2×2 pixel pitch has an area of 40 μm×40 μm and the fill factor is about 16%.While operating at a low frame rate,the sensor dissipates a very low power by power-management circuit making pixel-level comparators in an idle state.A digital correlated double sampling,which eliminates fixed pattern noise,improves SNR of the sensor, and multiple sampling operations make the sensor have a wide dynamic range.     

接收机整机最小噪声系数的实现

前级LNA的性能指标的好坏对接收机整体性能起主要作用。较流行的设计方法是用ADS等仿真软件在Smith圆图上作出LNA的等增益圆和等噪声圆，以确定LNA是否同时满足所要求的增益和噪声系数指标。这种方法虽然满足了设计要求，但往往不能获得整机噪声的最佳点。本文在符合设计指标后进一步对噪声和增益的关系进行分析，建立适用于常用接收机的简单模型，在此基础上获得基于整机噪声的最佳点。这种设计方法可以广泛应用于各种微波接收系统中,降低整机哭声系数.     

基于准十字窗口的中值滤波法在红外图像处理中的应用

中值滤波法是图像处理中一种非线性滤波技术，可对图像中的噪声进行有效的抑制，成为空域平滑的重要手段。针对中值滤波法的不足，提出一种基于准十字窗口的中值滤波方法。给出了抑制噪声、对图像边界最大保留的计算方法和运算步骤。并将其用于某型飞机实际红外图像处理实践，利用空间噪声曲线对该方法进行了验证。实践证明了其方法具有简单有效、易于编程实现、迭代性好、计算速度快的特点。     

KMLS型立式砂泵的振动噪声产生原因及解决措施

针对KMLS型立式砂泵振动、噪声产生原因及其表现特征,提出了解决措施。通过对这些原因的分析研究,可以提供泵设计者和生产者在减少砂泵振动方面采取相应的措施,使KMLS型立式砂泵能更好的服务于用户。     

Viscoelastic State for the Solutions of Spherically Symmetric Viscoelasticity Problems

The solutions of the spherically symmetric, linear, isothermal, and transient viscoelasticity problems via reciprocity theorem have been investigated for a specific material. The integral form of stress–strain relations has been used. The Laplace transform of a viscoelastic state, which is necessary for the integral equation arising as a result of reciprocity theorem, has been derived. This integral equation has been solved by Laplace transform. A sample problem has been solved to test the presented formulation. A numerical application of the analytic solution of this problem has been given.     

Aero-Acoustics of Modern Transonic Fans—— Fan Noise Reduction from Its Sources

The noise of aerodynamics nature from modern transonic fan is examined from its sources with the perspective of noise reduction through aero-acoustics design using advanced Computational Fluid Dynamics (CFD) tools. In particular the problems associated with the forward propagating noise in the front is addressed. It is identified that the shock wave spillage from the leading edge near the fan tip is the main source of the tone noise. Two different approaches have been studied to reduce the forward arc tone noise and two state-of-art transonic fans are designed using the strategies developed. The following rig tests show that while the fans exhibit other noise problems, the primary goals of noise reduction have been achieved through both fans and the novel noise reduction concept vindicated.     

红外背景干扰研究

根据从许多地区收集来的录象磁带上的图象数据和大量红外图象数据，对红外背景图象内的干扰进行了研究。图象内的噪声是以象元电平为单位的均方根形成计算。图象经过空间滤波处理，对其内的干扰再进行计算。为获得关于红外背景图象的空间频率构成的信息，在滤波和非滤波两种状态下计算了图象的光谱密度，把计算出的干扰值输入数据库取出多组数据并绘图，确定参数量（如天气、背景类型和测量条件等）对干扰电平的影响。